Overview
Study to pass the Cisco Certified Entry Networking Technician (CCENT) exam, Interconnecting Cisco Networking Devices Part 1 (100-105), with this comprehensive test prep course.
Syllabus
Introduction
- Welcome
- What you should know
- The CCNA exam
- Lab environment overview
1. Internetworking
- Introduction to internetworking
- Internetworking devices
- Overview of the OSI reference model
2. Ethernet
- Ethernet overview
- Ethernet addressing
- Ethernet cables
- Data encapsulation and the Cisco three-layer model
3. Introduction to TCP/IP
- Overview of TCP/IP model
- Application/process layer
- Transport/host-to-host layer
- Internet layer
- IP addressing
4. Easy Subnetting
- Subnet basics
- Subnet block sizing
- Subnet by example
- Determine subnet from an IP address
- Class B subnetting
5. VLSM, Summarization, and Troubleshooting TCP/IP
- VLSM
- VLSM by hand
6. Cisco Internetworking Operating System (IOS)
- Introduction to the IOS CLI
- Interface and password commands
- Basic CLI commands
- Administrative configurations
- Router and switch interfaces
- Telnet and SSH
- View, save, and erase configurations
- Troubleshoot the Cisco IOS
7. Managing a Cisco Internetwork
- Router and switch components
- Back up and restore Cisco configurations
- Configure DHCP
- Configure DHCP relay
- Syslog and Network Time Protocol (NTP)
- CDP/LLDP and resolving hostnames
8. IP Routing
- Overview of IP routing
- The IP routing process
- Configure IP routing
- Static routing
- Default routing
- Administrative distances and routing protocols
- Overview of Routing Information Protocol (RIP)
- Configure RIPv2
- Verify RIPv2 routing
9. Layer 2 Switching
- Overview of switching services
- Configure a Catalyst switch
- Overview of port security
- Configure port security
10. VLANs and InterVLAN Routing (IVR)
- Overview of VLANs
- Configure VLANs
- Configure trunk links
- Overview of IVR
- Configure IVR on a router
- Configure IVR on a layer 3 switch
11. Security
- Introduction to access lists
- Configure access lists
- Secure VTY (telnet/SSH) access
12. Network Address Translation (NAT)
- Introduction to NAT
- Static NAT
- Configure static NAT
- Dynamic NAT
- Configure dynamic NAT
- NAT overload (PAT)
- Configure NAT overload
13. IPv6
- Introduction to IPv6
- IPv6 addresses and expressions
- Stateless and stateful autoconfiguration
- Compare IPv6 and IPv4 headers
- Overview of ICMPv6
- IPv6 addressing in an internetwork
- Configure IPv6
- Static and default IPv6 routing
- Next steps
Conclusion